REQUEST A QUOTE / ENQUIRY FORM
PiezoMEMS Analyzer
Radiant Technologies’ Precision PiezoMEMS Analyzer integrates digital, analog, and communications circuit functions with the existing non-linear materials measurement capabilities of the Precision Multiferroic Non-linear Materials Tester, all supervised by Radiant's Vision programmable test environment. The PiezoMEMS Analyzer not only measures piezoelectric properties of actuator and sensor elements of a commercial product, it will communicate with the product's electronic logic, talk to embedded microprocessors, supply asynchronous voltages and pulses, and measure sensor frequencies.
REQUEST A QUOTE
Output Range +/-100V or +/-200V expandable to 10kV
- 16-bit Arbitrary Waveform Generator output
- 270KHz @ +/-100V and 100KHz @+/-200V built-in
- Accuracy 0.5% or Better
- Maximum Data Points 32000
- Minimum Pulse Widths down to 0.5µs
- Maximum Pulse Widths down to 1µs and up to 1s
- Vision controlled output ramp for maximum accuracy
- Polarization Measurement under AC & DC Magnetic Fields
- 18-bit Resolution (analog to digital converters)
- 0.5µs capture rate with 0.1µs interlace facility
- Polarization, output voltage and SENSORs captured simultaneously
- Minimum charge sensitivity -> 0.80fC
- Minimum PZT capacitor area -> 0.5u2
- Maximum Area Resolution 52.6mC
- Maximum Area Resolution >130cm2 w/o HVI attached)
- Maximum hysteresis loop frequency ->270KHz
- Minimum hysteresis loop frequency -> 1/30th Hz