IMPURITY / CONTAMINATION ANALYSERS


The OCS Film Quality Analyzer (it was known as gel counter in the past), is the world's most widely implemented film inspection system in research and development (R&D) centres, or in the quality control (QC) laboratory for quality assurance (QA) of polymer film samples. The FSA100 Film Surface Analyser designed by OCS, is a modular surface inspection equipment which can be used in laboratories or installed in production line for defects detection of impurities and contamination. The common defects are such as gels, black specks, fish eyes, holes and scratches

The Film Surface Analysers from OCS are built with equipment of latest advance technology. Its high resolution CCD line scan cameras and special lighting systems are able to optimally measure defects in transparent, opaque or dyed condition such as in the case of non-transparent plastic films.

OCS has also developed surface inspection systems for wire and cable industry. The OCS Tape Quality Analyser (TQA100) is used for testing transparent materials (tape) to detect impurities such as black specks, fibres and metal particles. The OCS X-ray Tape Analyser (XTA100) is an X-ray-based inspection system for polymer films, specially developed for detection of metal particles.

Available in: Malaysia, Singapore, Thailand, Indonesia and Vietnam
Manufacturer's website : https://www.ocsgmbh.com/en/



Impurity / Contamination Analysers Products


Film Surface Analyser (FSA100V2 / FSA200V2)

The Film Surface Analyzer FSA100 V2 from OCS is a modular surface inspection system which is suitable to be used in laboratories or for the production.

Read More >>>


External Film Surface Analyser (FSA100EXT)

The OCS External Film Surface Analyser (FSA100EXT) is an optoelectronic inspection system for polymer films which is specially designed for implementation at OCS external (laboratory) extrusion lines.

Read More >>>


Surface Quality Analyser (SQA100)

The OCS Surface Quality Analyser (SQA100) is specially designed to detect irregularities on the surface (pips) of polymer films (tape) in the wire and cable industry.

Read More >>>


Tape Quality Analyser (TQA100)

The OCS Tape Quality Analyser (TQA100) is used for detection of impurities such as black specks, fibres and metal particles in transparent materials (tape) in the wire and cable industry.

Read More >>>


X-Ray Tape Analyser (XTA100)

The OCS X-ray Tape Analyser (XTA100) is an X-ray-based inspection system for polymer films in the cable and wire industry which is specially developed for detection of metal particles.

Read More >>>


Liquid Analyser (LA20)

The OCS Liquid Analyser (LA20) is used for optoelectronic inspection of cellulose ethers dissolved in water (e.g. methyl cellulose). This enables the detection of insoluble components.

Read More >>>


Sample Tester (ST4)

The OCS Sample Tester (ST4) is a compact tabletop instrument for optical detection of irregularities and contamination in transparent and non-transparent surfaces such as plastics, steel, paper, textiles and non-wovens.

Read More >>>


Multiple Plaque Analyser (MPA100)

The OCS Multiple Plaque Analyser (MPA100) is a compact tabletop device used for detection of defects on transparent and opaque material plates in the laboratory or in research and development centres.

Read More >>>

TOP