LEEB HARDNESS TESTER NOVOTEST T-D3


Leeb Hardness Tester is used for measuring the hardness of steels, non-ferrous metals, cast iron, materials with coarse-grained structure, and solid products according to ASTM A956.

The Leeb method (ASTM A956) is the world’s most popular method for testing the hardness of metals using a portable hardness tester. Leeb method is also called dynamic method for determining hardness is popular due to its ease of use and the user normally does not need to learn special skills or having any knowledge in the application of hardness measurement,. To perform the test, it is only necessary for the user to charge up the impact body of the device’s probe, install the probe on the tested surface, press the release button of the probe and the hardness value will be displayed on the screen.

This method is recommended for testing large products, weighing from 5 kg and a thickness of 10 mm and more. Sometimes, depending on certain requirements for fixing the product, it is also possible to measure on smaller parts.

The Leeb Hardness Tester NOVOTEST T-D3 can be applied for products with a poorly prepared surface (roughness 3.2 Ra and more), as well as for materials with a coarse-grained structure, such as cast iron and others.

Scales and materials
The device comes with preliminary calibrations for various scales and materials, which makes the device universal.
SCALES: HRC, HRB, HB, HV, HL, MPa.
MATERIALS: steel, alloy steel, cast iron, stainless steel, aluminium, bronze, brass, copper.



REQUEST A QUOTE
• Leeb Hardness Tester NOVOTEST T-D3-1
• Leeb Hardness Tester NOVOTEST T-D3-2
• Leeb Hardness Tester NOVOTEST T-D3-Test

  • Large full color graphic display with bright backlighting
  • Various measurement modes: statistic, graph, histogram, smart, signal
  • Calibration of any scale in any range
  • Convenience and ease of measurement
  • 88 combinations of materials and hardness scales (calibrations)
  • Extended temperature range (frost, down to - 40°C)
  • Internal memory and communication with PC
  • New, intuitive menu with tips on the buttons
  • Water resistant case & rubber protected bumper
  • Optional wireless mini printer

Leeb probe types
  • D
  • DC
  • DL
  • C
  • D + 15
  • E
  • G
Measuring range for steel
  • HRC:20-70
  • HB:90-650
  • HV:230-940
  • Tensile strength, MPa: 370-1740
  • User calibrations for any range (for example: HV100-1600)
Measuring accuracy
  • HRC: 2HRC
  • HB: 10HB
  • HV: 15HV
Standards ASTM A956, ASTM E140
Indenter Hardened ball (Leeb)
Hardness scales
  • Leeb probe – HRC, HRB, HB, HV, HL, MPa
  • Additional custom scales for calibration
Materials
  • Dynamic (Leeb) pre-calibrated for steel, alloy steel, cast iron, stainless steel, aluminum, bronze, brass, copper
  • Additional custom materials for calibration
TOP