The Elastocon EB 12-II cabinet ageing oven from ELASTOCON is the ideal instrument to
perform ageing test of plastics and rubber materials under controlled environment.
It has a high air speed with laminar flow from bottom to top, and a factory set
throttle to give a fixed air exchange of 7 or 14 changes per hour, which meets the
requirements in ISO 188 method B. The oven is having useful volumes of 50 litres.
The setting can be programmed by the user on the PLC colour touch screen.
Elastocon's cabinet ageing ovens have been designed and built with excellent
temperature stability and distribution by using an inner chamber with a controlled
air flow. The temperature accuracy is very essential for heat ageing tests, with a
1°C error in temperature corresponds to around 10 % error in test time.
The instrument is equipped with two temperature sensors, one for temperature control
and one for measuring the temperature close to the samples. This sensor can also be
connected to a logging software for recording.
These ovens are ideal for ageing test of finished products and large test pieces
which are unsuitable for cell ovens due to size. Rods will be supplied with these
ovens for accommodating most types of samples
The Cabinet Ageing Oven EB 12-II meet the standards of ISO 188 method B, ISO 4577,
DIN 53508 P.6.2