The EB 04-II cabinet ageing oven from ELASTOCON is the ideal instrument to study the
precision ageing test of plastics and rubber materials under controlled environment.
It has a low air speed and a flow meter which can be set to 3 to 20 changes per
hour, which meets the requirements in ISO 188 method A. The oven is having useful
volumes of 120 litres. The setting can be done by the user on the PLC colour touch
screen.
Elastocon's cabinet ageing ovens have been designed and built with excellent
temperature stability and distribution by using an inner chamber with a controlled
air flow. The temperature accuracy is very essential for heat ageing tests, with a
1°C error in temperature corresponds to around 10 % error in test time.
The instrument is equipped with two temperature sensors, one for temperature control
and one for measuring the temperature close to the samples. This sensor can also be
connected to a logging software for recording.
These ovens are ideal for ageing test of finished products and large test pieces
which are unsuitable for cell ovens due to size. Shelves and rods will be supplied
with these ovens for accommodating most types of samples
The Cabinet Ageing Oven EB 04-II meet the standards of ISO 188 method A,
IEC 60811-1-2, IEC 60216-4-1, and other equivalent standards