Melt Flow Measurement System (OP5)


The OCS Melt Flow Measurement System (OP5) allows the measurement of the Melt Index (MI) of polymer powder or pellet samples. The OP5 MFR measurement process is carried out by means of exact control of the melt flow in combination with a highly precise OCS-developed melt-pressure measurement technique. This method typically achieves a reproducibility of +/− 1%. The fast sampling reduces the delay time between laboratory and production considerably.

Testable Raw Materials: Pellets and Powder


REQUEST A QUOTE

  • Fast sample preparation and measurement
  • Real-time results in 5 to 10 minutes
  • High reproducibility
  • One-time ISO calibration per material type and measurement range
  • Real-time display via touch panel with data trends as well as optical and acoustic alarm functions
  • Measurement results according to ISO1133 and ASTM D1238


Melt flow range 0.05–1000 cm³/10 min
Test temperature Up to 240°C
Reproducibility +/– 1%
Pellet / powder consumption Approx. 0.6 kg/h
Communication protocol MODBUS (RTU, TCP/IP), PROFIBUS, PROFINET, OPC (Server/Client), CSV file, customer-specific

TOP