AMI Sync Series: High-Throughput Surface Area & Porosity Analyzer
Introduction
The AMI Sync Series is a fully automated, high-performance gas physisorption analyzer engineered for rapid, precise, and high-throughput characterization of surface area and pore size distributions in both porous and non-porous materials.
Designed to meet the rigorous demands of both advanced academic research and fast-paced industrial QA/QC, the AMI Sync Series utilizes robust vacuum-volumetric measurement technology backed by intelligent control software. Available in flexible 1-, 2-, or 4-station configurations, the system allows laboratories across Malaysia to scale their testing capabilities seamlessly—supporting up to 12 analysis ports controlled via a single PC.
Whether evaluating heterogeneous catalysts, battery materials, or MOFs, the AMI Sync Series delivers accurate, reproducible adsorption and desorption isotherms without sacrificing lab space or analytical speed.
Designed to meet the rigorous demands of both advanced academic research and fast-paced industrial QA/QC, the AMI Sync Series utilizes robust vacuum-volumetric measurement technology backed by intelligent control software. Available in flexible 1-, 2-, or 4-station configurations, the system allows laboratories across Malaysia to scale their testing capabilities seamlessly—supporting up to 12 analysis ports controlled via a single PC.
Whether evaluating heterogeneous catalysts, battery materials, or MOFs, the AMI Sync Series delivers accurate, reproducible adsorption and desorption isotherms without sacrificing lab space or analytical speed.
Key Advantages & Design Features
- Scalable Architecture & High Throughput: Configurable with 1, 2, or 4 simultaneous measurement ports per unit. Link multiple instruments via LAN to operate up to 12 analysis ports with centralized control.
- Exceptional Sensitivity & Reproducibility: Features an absolute BET surface area detection limit as low as 0.1 m2 absolute (0.01 m2 /g). Achieves high reproducibility (RSD ≤ ±1.0%) on standard reference materials like BAM P115.
- Extended 90+ Hour Analysis Capability: Equipped with an extra-large 3-liter Dewar flask that enables continuous, uninterrupted runs exceeding 90 hours. Supports live refilling during active experiments without interrupting data capture.
- Compact Footprint: All models feature a standardized, space-saving footprint (51 × 53 × 93 cm), ideal for modern laboratories with limited bench space.
- Advanced Contamination Control: A two-step inline filtration system protects internal manifolds from particulate contamination, significantly extending valve and transducer lifespan.
- Precision Temperature & Pressure Control: Constructed with vacuum-brazed stainless steel manifolds and high-cycle bellows valves rated for over 5 million operations. Internal manifold temperature stability is maintained at ±0.05°C.
- Optional CryoTune™ Technology: Fully integrated low-temperature cold bath system allowing precision adsorption isotherm measurements across custom, adjustable temperature ranges.
Key Applications
The AMI Sync Series is tailored for a wide spectrum of material science applications in research institutes, universities, and manufacturing plants throughout Malaysia:
- Catalysis & Petrochemicals: Surface area determination, active site accessibility, mesopore distribution, and pore volume analysis of catalysts, zeolites, and catalyst supports.
- Energy Storage & Battery Materials: Characterization of anode/cathode active materials, separators, and porous carbon matrices for lithium-ion and sodium-ion batteries.
- Advanced Nanomaterials & MOFs: Micropore and mesopore structural mapping of Metal-Organic Frameworks, covalent organic frameworks (COFs), and mesoporous silica.
- Pharmaceuticals & Powders: Specific surface area determination to predict powder dissolution rates, shelf stability, and batch-to-batch consistency.
- Environmental & Carbon Capture: Characterization of porous adsorbents used for CO2 capture, gas separation, and water purification.
Intelligent Operating Software & Data Reduction
Driven by user-friendly, multi-lingual control software, the AMI Sync Series simplifies complex physisorption workflows:
- Multi-Instrument Control: Interface and manage up to 8 instruments simultaneously from one PC.
- Sample Protection: Features a 3-stage controlled evacuation protocol to prevent fine powder fluidization and sample elutriation during initial vacuum drawdown.
- Built-In Method Libraries: Quick-start templates for standard test protocols, automated leak testing, and real-time status displays.
- Comprehensive Data Reduction Models:
- Single-point and Multi-point BET Surface Area
- Langmuir Surface Area
- Statistical Thickness Surface Area (STSA)
- BJH Mesopore Adsorption & Desorption Analysis
- Horvath-Kawazoe (HK) & Saito-Foley (SF) Micropore Models
- Non-Local Density Functional Theory (NLDFT) Pore Size Distribution
- Total Pore Volume & t-Plot Analysis
REQUEST A QUOTE / ENQUIRY FORM
SPECIFICATIONS
BROCHURE
SPECIFICATIONS
| Parameter | Specification Details |
| Model Options | Sync 110 / 210 / 220 / 420 / 440 |
| Analysis Ports | 1, 2, or 4 Ports (Expandable up to 12 ports total) |
| P0 Transducer | 1 Dedicated P0 Transducer (Supports simultaneous saturation vapor pressure monitoring) |
| Analysis Pressure Transducers | 1, 2, or 4 (Configuration dependent; shared or dedicated transducer per station) |
| Transducer Range & Accuracy | 1000 Torr; Accuracy: 0.05% Full Scale; Resolution: 0.0005% Full Scale |
| Specific Surface Area Range | ≥ 0.01 m2/g (N2); Repeatability: (RSD ≤ ±1.0%) |
| Pore Size Distribution Range | 0.35 nm to 500 nm (Achieved using CO2 for ultrafine micropores); Repeatability: ≤±0.02 nm |
| Pore Volume Sensitivity | ≥0.0001 cm3 /g |
| Relative Pressure Range (P/ P0) | 10-4 to 0.998 |
| Vacuum System | Mechanical pump (Ultimate vacuum 10-1 Pa; minimal 7.5 × 10-4 Torr) |
| Compatible Adsorbates | N2, CO2, Ar, Kr, H2, O2, CO, CH4, etc. |
| Dewar Volume & Hold Time | 3.0 Liters; > 90 hours continuous holding time (supports live refilling) |
| Dimensions (W x D x H) | 51 x 53 x 93 cm |
| Instrument Weight | Approx. 45 kg |
| Power Requirements | 100 – 240 VAC,50 / 60 Hz, Max Power 300 W |
BROCHURE
| AMI sync Brochure |  Free Download PDF >> |
SURFACE AREA AND POROSITY ANALYZERS