Cast Film Line
The OCS Cast Film Extrusion Line is a high-performance system for the production of high-quality flat films. It offers a wide range of features, including optical and physical property measurement, as well as the ability to detect and measure gels, contaminations, degradations, haze, gloss, density, and additives. All settings and parameters are stored in the touch panel control system, which guarantees the reproducibility of the film at any time.
The OCS Cast Film Extrusion Line can be used to process a wide range of polymers, including PP, PET, PC, HDPE, and LDPE. The materials can be in the form of pellets, powders, or flakes.
The OCS Cast Film Extrusion Line can be used to process a wide range of polymers, including PP, PET, PC, HDPE, and LDPE. The materials can be in the form of pellets, powders, or flakes.
REQUEST A QUOTE / ENQUIRY FORM
FEATURES
MODULES INCLUDED
Add-on 1
Add-on 2
Add-on 3
Add-on 4
Add-on 5
FEATURES
- Measuring Extruder (ME) comes with flexible height adjustment (infusion position)
- Maintenance and cleaning positions of the Measuring Extruder (ME) can be approached by means of an electric motor
Modular architecture of the - Modular Film Analyser (MFA) to facilitate customisation of additional measuring devices
- Operation via touch panel with data trend as well as optical and acoustic alarm functions
- All system parameters are monitored and saved in the touch panel control system
- Several options are available for data communication
MODULES INCLUDED
- Measuring Extruder (ME20/ME25/ME30/ME40/ME45) with fix lip die 50–150 mm or flex lip die 150–350 mm
- Modular Film Analyser with two chill rolls (MFA-CR)
- Film Surface Analyser (FSA100V2/FSA200V2)
Add-on 1
Film Thickness Measurement (FTM)
The OCS Film Thickness Measurement (FTM) allows the continuous measurement of the thickness of polymer film (flat film, blown film or tape). For measurement, the film is guided between two precision rollers. One of the rollers is deflected according to the film thickness. This deflection is measured by a digital probe and evaluated by microcontroller-based electronics. The measured value is shown on a display and can be evaluated via analogue or digital interfaces.Technical Details
| Measuring range | 0–5000 µm |
| Exactness | +/− 1 µm |
| Haul-off force | 1 N |
| Haul-off speed | 0–20 m/min |
| Communication protocol | MODBUS/RTU (further protocols on request) |
- OCS Cast Film Line
- OCS Blown Film Line
- OCS Tape Line (TCA)
- OCS Modular Film Analyser (MFA)
Add-on 2
Gloss Measurement (OGM)
The OCS Gloss Measurement (OGM) is designed for the constant and precise control of film gloss properties. The measuring device is integrated into the Modular Film Analyser (MFA). It enables a continuous measurement of the gloss value on polymer film. The gloss properties of films are analysed based on their different ability to reflect light. A special LED lighting unit illuminates the continuous film while a photo diode measures the strength of the reflected light. The measured amount of gloss, from matt to glossy, is given in GU (Gloss Units).Features
- Robust, precise measuring unit
- Gloss measurement in GU (Gloss Units), matt to gloss
- Alarm function when limit value exceeds or falls below a specified range
- Continuous measurement of the gloss value as well as calibration according to ASTM D523, DIN 67530, DIN EN 14086 and ASTM D2457
| Measuring area | 60°: DIN 67530, 45°: DIN EN 14086, 45°: ASTM D2457 (0–150 GU), area 3 cm |
| Measuring range | 0–200 GU |
| lndicator resolution | 0.1 GU |
| Averaging | 1–50 s |
| Detector | Silicon photo detector with spectral evaluation |
| Communication protocol | MODBUS (RTU, TCP/IP), PROFIBUS, PROFINET, OPC (Server/Client), CSV file, customer-specific |
- OCS Cast Film Line
- OCS Blown Film Line
- OCS Modular Film Analyser (MFA)
Add-on 3
Haze and Transmission Measurement (OHM)
The OCS Haze and Transmission Measurement (OHM) is used for the automated and continuous measurement of the haze properties on polymer film. It additionally determines the transmission average. The measuring instrument is integrated into the Modular Film Analyser (MFA) or can be used as a stand-alone version (tabletop unit).Features
- Continuous haze and transmission measurement
- Simple multi-point calibration
| Measurement range haze | 0−100% |
| Mesurement range transmission | 0−100% |
| Accuracy | +/− 0,2% |
| Measured area diameter | Ø 22 mm |
| Spectral adaptation | CIE standard spectral value function V (λ) under standard light type C |
| Communication protocol | MODBUS/TCP |
- OCS Cast Film Line
- OCS Blown Film Line
- OCS Modular Film Analyser (MFA)
Add-on 4
Spectroscopical Measurement APLAIRS®
APLAIRS® (Analysis of Plastics by InfraRed Spectroscopy) is a spectroscopic method for measuring additives, (co-)monomer compositions and chemical and physical properties in the production of polyolefins. This concept allows the automation of the daily continuous measurement requirements for quality control. For this purpose, the polymer film runs through the APLAIRS® system, which is equipped with an FTIR spectrometer and specially developed software.The measurement takes place in real time. The spectra are recorded and properties are predicted, documented and graphically processed. The results can also be transferred to superordinate systems. This ensures continuous quality control and documentation and the resulting reliable control of various processes. The automated sample preparation leads to personnel savings and significantly reduces labour costs. Features
- Using the software, continuous recording of spectrums and prediction of analysis data (every three minutes)
- Robust and precise FTIR spectroscopy
- Conventional as well as multivariate analysis can be applied to predict the analysis data
- Analysis of materials, such as LDPE, LLDPE, HDPE, PP, ABS, PS, PET, EVA and PC
- Analysis of additives such as antioxidants, lubricants, UV absorbers, stabilisers, fillers, processing aids, etc.
- Testing of physical properties, such as density in polyolefin, thickness, etc.
- OCS Cast Film Line
- OCS Blown Film Line
Add-on 5
Label Printer (LP100)
The OCS Label Printer (LP100) ensures the highest quality standards with regard to the labelling of, and repair of defects on, polymer films. Simple operation enables reliable and fast printing.Features
- Reliable and fast printing
- Precise impression
- Easy operation
- Compact design
- Meets the highest quality standards
- OCS Tape Line
- OCS Modular Film Analyser (MFA)
RAW MATERIALS INSPECTION SYSTEM
RAW MATERIALS INSPECTION SYSTEM