MI-40
The Melt Flow Indexer Mi-40 with automatic weight selection can measure tests according to ISO 1133 and ASTM D1238 procedures B as well as ISO 1133 and ASTM D1238 Procedure C for the “Half Height/Half Diameter” standard, and also procedure D for the FRR test (Flow Rate Ratio) and ASTM D3364.
It can go up to 60kg due to force controlled compressing. It can also accommodate multi-load measurements with up to 8 different weights which are operable in descending and ascending mode.
It can go up to 60kg due to force controlled compressing. It can also accommodate multi-load measurements with up to 8 different weights which are operable in descending and ascending mode.
REQUEST A QUOTE / ENQUIRY FORM
FEATURES
VIDEOS
FEATURES
- Force controlled pre-loading / ejection via drive and test weights
- Multi-load tests with up to 8 different weights, ascending, descending or freely selectable
- High-precision timer with a resolution better than 0.001 s
- Temperature control algorithm, resolution 0 to 320°C: 0.01°C, 320 to 500°C: 0.1°C
- High-resolution position transducer to measure volume output
- Automatic computation of resolution
- Mobile rheology with the miAPP via modern web browser on a tablet or PC
VIDEOS
MELT FLOW INDEXER
MELT FLOW INDEXER