Consumable for Mounting
Streamline Your Sample Prep: Why Specimen Mounting Matters
After the initial cutting process, specimen mounting becomes crucial for optimizing your sample preparation workflow. But it’s not just about presentation; mounting delivers several key benefits:
- Enhanced Handling: Small, irregularly shaped specimens can be challenging to work with. Mounting creates a uniform, manageable format compatible with automated holders, streamlining subsequent grinding, polishing, and analysis.
- Fragile Protection: Delicate materials, thin layers, and coatings are vulnerable to damage during preparation. Mounting encapsulates and protects them, ensuring pristine samples for accurate analysis.
- Precision Edge Retention: Maintaining sharp, uncompromised edges is crucial for accurate structural observations. Mounting provides the necessary support, minimizing edge loss and ensuring reliable results.
- Consistent Sample Size: Standardized dimensions achieved through mounting allow for seamless integration with automated grinding and polishing equipment.
Achieve Flawless Sample Preparation with Metkon Hot Mounting Resins: Hardness, Shrinkage, & Viscosity Optimized
Selecting the right hot mounting resin is critical for achieving high-quality sample preparation. Metkon’s diverse range of hot mounting compounds goes beyond simply embedding your specimens; it empowers you with meticulous control over hardness, shrinkage, and viscosity, ensuring optimal results every time.
Why Metkon Hot Mounting Resins?
- Hardness Matching: Our resins come in a variety of hardness levels, allowing you to perfectly match the hardness of your specimen. This prevents uneven abrasion during grinding and guarantees consistent edge quality.
- Minimal Shrinkage: Formulated for minimal shrinkage, Metkon resins minimize the risk of gaps forming between the specimen and the mount, ensuring complete encapsulation and edge protection.
- Optimal Flow and Penetration: Our resins boast tailored viscosity for effortless flow and complete penetration into all areas of your specimen, regardless of its complexity.
Preserve Delicate Samples with Ease: Introducing Metkon Cold Mounting Resins
For heat-sensitive materials like coatings, PCBs, and sensitive electronics, achieving high-quality sample preparation can be a challenge. Conventional hot mounting methods pose the risk of damage and distortion. That’s where Metkon Cold Mounting Resins come in, offering a gentle yet effective solution for preserving your delicate specimens.
Why Choose Metkon Cold Mounting Resins?
- Heat-Sensitive Safe: Formulated with low-exothermic reactions, our resins eliminate the risk of heat damage, ensuring the integrity of your sensitive materials.
- Unmatched Ease of Use: Our cold mounting process is effortless and intuitive. Simply mix the resin, embed your specimen, and allow it to cure at room temperature – no pressure or heat required.
- Versatility Across Materials: Metkon offers a range of cold mounting resins specifically designed for diverse materials, including coatings, polymers, composites, and electronics.
Contact us today to discuss your specific needs and discover the Metkon difference!
REQUEST A QUOTE / ENQUIRY FORM
HOT MOUNTING RESINS
COLD MOUNTING RESINS
BROCHURE
HOT MOUNTING RESINS
| Order No. | Hot Mounting Resin | Remarks |
| 29-001 | Black Phenolic Powder, 1 kg. | Standard examination of all materials. Low shrinkage Heating: up to 180°C |
| 29-001/10 | Black Phenolic Powder, 10 kg. | Standard examination of all materials. Low shrinkage Heating: up to 180°C |
| 29-001/20 | Black Phenolic Powder, 20 kg. | Standard examination of all materials. Low shrinkage Heating: up to 180°C |
| 29-002 | Red Phenolic Powder, 1 kg | Standard examination of all materials. Low shrinkage Heating: up to 180°C |
| 29-002/10 | Red Phenolic Powder, 10 kg | Standard examination of all materials. Low shrinkage Heating: up to 180°C |
| 29-002/20 | Red Phenolic Powder, 20 kg | Standard examination of all materials. Low shrinkage Heating: up to 180°C |
| 29-010 | Transparent Acrylic Powder, 1 kg | Standard examination of all materials. Perfectly transparent |
| 29-010/10 | Transparent Acrylic Powder, 10 kg | Standard examination of all materials. Perfectly transparent |
| 29-011 | Epoxy, Hard 1 kg | Examination of edges surface. (Coating, deposits, thermal, treatment) |
| 29-011/10 | Epoxy, Hard 10 kg | Examination of edges surface. (Coating, deposits, thermal, treatment) |
| 29-012 | Diallyphtalat, 1 kg | Examination of edges surface. (Coating, deposits, thermal, treatment) |
| 29-012/10 | Diallyphtalat, 10 kg | Examination of edges surface. (Coating, deposits, thermal, treatment) |
| 29-013 | Conductive Bakelite powder, 0.5 kg | For SEM examination of all materials |
| 29-099 | Mould Release Spray Can, 400 ml |
COLD MOUNTING RESINS
| Code | Order No. | Cold Mounting Resins | Type |
| DMT 35 | 29-501 | Powder, 1000 gr | Acrylic |
| DMT 35 | 29-502 | Fluid, 500 ml | Acrylic |
| DMT 20 | 29-511 | Powder (Transparent), 1000 gr | Acrylic |
| DMT 20 | 29-512 | Fluid (Transparent), 500 ml | Acrylic |
| DMT CON | 29-513 | Conductive cold mounting powder 500 gr | Acrylic |
| DMT CON | 29-514 | Conductive cold mounting fluid 500 ml | Acrylic |
| DMT ACE | 29-515 | Cold mounting powder, soluble with acetone 1000 gr | Acrylic |
| DMT ACE | 29-516 | Cold mounting fluid, soluble with acetone 500 ml | Acrylic |
| EPOCOLD-R | 29-505 | Epoxy Resin (2 x 500 ml) | |
| EPOCOLD-H | 29-506 | Epoxy hardener (230 ml) |
BROCHURE
| Consumables For Mounting Catalogue |  Free Download PDF >> |
MOUNTING PRESS
MOUNTING PRESS